Kyocera DF-710 Manuel D'utilisation page 32

English
3
Open the folding unit paper plate guide (D9) and
remove the paper jam.
4
Open the folding unit top cover and turn the
folding unit conveyor knob (D10) to the left to feed
the paper further along for easy removal.
5
Lift open the folding tray and remove any jammed
paper.
6
Close the open trays and covers, and return the folding unit to its original position.
Cautions to be taken when the internal tray is pulled out
If you turn off the power or open the front cover
accidentally during operation of the document
finisher and the internal tray confirmation window
(1) becomes red, the internal tray (D5) is
automatically locked and cannot be pulled out.
If you turn off the main power, turn the power on
again. If you open the front cover, close it. Then,
the internal tray confirmation window (1) becomes
black and the lock of the internal tray (D5) is
released.
Before pulling out the internal tray (D5), make sure that the internal tray confirmation
window (1) is black.
30 DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
D5
1