Kyocera DF-710 Manuel D'utilisation page 19

4
Remove the empty staple cartridge from the
staple cartridge holder.
NOTE:
removed when it contains no more staples.
5
Insert the new staple cartridge into the staple
cartridge holder.
6
Re-install the staple cartridge holder. The staple
cartridge holder will click into place when it has
been inserted correctly.
7
Close the right cover (D8) and re-install the finisher back into position on the machine.
Refilling Staple Cartridge Holders B/C (Option)
Follow the steps below to refill staples for the optional folding unit. Follow the same
procedure to refill staple cartridge holders B and C.
1
Push the folding unit release lever and pull out the
folding unit.
2
Remove staple cartridge holder B or C.
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
The staple cartridge can only be
English
17