Kyocera DF-710 Manuel D'utilisation page 15

A maximum of 16 sheets can be bound in a single operation. Up to 64 original sheets can
be loaded at one time.
3
Select other features as required and press Start.
4
Copies will be automatically stapled and ejected
onto the folding tray.
If the maximum capacity is reached, a message
displays. Remove all copies from the folding tray
to continue.
NOTE:
Center-Folding Unit (option) on page 37.
5
On completion of the job, remove the copies from the folding tray.
Hole Punch Mode
This mode produces hole punched copies
automatically.
Hole Punch mode can be used with Sort: ON,
Staple and Sort: OFF modes.
The following paper sizes can be used:
Inch models
•
•
Metric models
•
•
Paper weights must be between 45 g/m
NOTE:
output destination for punch mode.
1
Select Hole Punch mode on the operation panel of the machine.
NOTE:
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
For further information refer to
2-hole punch: 8 14", 8
×
1/2
8 13", 8 11", 5
× ×
1/2 1/2
3-hole punch: 11 17", 11
×
2-hole punch: A3, B4, A4, A4R, B5, B5R, A5R, Folio, 8
8 13", 11 8 ", 8
× ×
1/2 1/2
4-hole punch: A3, A4, 11
Punching requires the optional punching unit. Tray C cannot be specified as the
Refer to the Operation Guide for the machine for more detailed information.
13 ",
×
1/2 1/2
8 ", A3, B4, A4, A4R, B5, B5R, A5R and Folio
×
1/2 1/2
8 ", A3 and A4
×
1/2
11" and 5 8
× ×
1/2 1/2
17" and 11 8 "
× ×
1/2
2
and 200 g/m
14", 8
×
1/2 1/2
"
1/2
2
.
English
13 ",
×
1/2
13