Maintenance; Cleaning And Storage; Ordering Extra Screwdriver Bits - easymaxx HL-S36-30L Mode D'emploi

Maintenance

• The device does not require any maintenance.
• If parts of the device, cable or plug show visible signs of damage, the device must
not be used. Do not try to repair the device yourself or to replace the cable or plug. In
the event of damage, please immediately contact our customer service department
or visit an authorised workshop to guarantee your own safety.

Cleaning and Storage

CAUTION!
❐ Never immerse the cordless screwdriver or the charger in water or other liquids.
❐ Make sure before cleaning that the rotation direction changeover switch is in the
middle position in order to avoid any accidental start-up.
❐ Do not use corrosive or abrasive cleaning agents or cleaning pads for cleaning.
These could damage the surface of the device.
• Keep the screwdriver bits clean. Remove any dust, dirt or deposits if necessary with
a slightly damp cloth. Then dry with a soft, dry cloth.
• If necessary, wipe down the device with a slightly damp, soft cloth. Dry it with a soft
cloth.
• Store the screwdriver bits in the storage compartment on the top of the cordless
screwdriver.
• Store the cordless screwdriver and the charger in a dry place which is protected from
the effects of weather and temperature and is out of the reach of children.

Ordering Extra Screwdriver Bits

You can order extra screwdriver bits via: www.service-shopping.de
26