Displaying And Deleting Measurements - Beurer medical BC 80 Mode D'emploi

6. Displaying and deleting measurements

User memory
The results of every successful measurement are stored
together with the date and time. If there are more than 60
measurements, the oldest measurements are lost.
• To access memory recall mode, press the M1 or M2
memory button to select your desired user memory (
– To view the measurements for user
memory press the M1 memory
button.
– To view the measurements for user
memory , press the M2 memory
button.
Your last measurement will appear on
the display.
Average values
• Press the relevant memory button (M1 or M2).
Press the M1 button if you have selected user memory
1. Press the M2 memory button if you have selected user
memory 2.
A flashes on the display.
The average value of all saved meas-
ured values in this user memory is
displayed.
• Press the relevant memory button
(M1 or M2).
AM flashes on the display.
The average value of the morning meas-
urements for the last 7 days is displayed
(morning: 5.00 a.m. – 9.00 a.m.).
• Press the relevant memory button
(M1 or M2).
).
PM flashes on the display.
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).
Individual measured values
• When the relevant memory button
(M1 or M2) is pressed again, the last
individual measurement is displayed
(in this example, measurement 03).
• When the relevant memory button
(M1 or M2) is pressed again, you can view your individual
measurements.
• To switch the device off again, press the START/STOP
button .
You can exit the menu at any time by pressing the
START/STOP button
Deleting measured values
• To clear the memory of the relevant user memory, you
must first select a user memory.
23
.