Memory Card Microsd; Service And Maintenance - ENBIO MICROJET Mode D'emploi

the autoclave and holding the flask in hands. a magnetic stirrer should be
used, instead.
media containing substances sensitive to high temperature. the tempera-
ture of the medium is still high after it was removed from the microjet unit,
and it exerts negative effect on the medium quality; additionally - possible
decomposition of components continues. if this situation is important re-
member to cool down the flask in any other suitable way.
5. MIcROSD MEMORy caRD.
the microjet sterilizer is equipped in a recorder to register sterilization
processes. the data is automatically saved in a removable and rewritable
memory card. the data can be copied and stored in a Pc. the card is in-
serted in the sterilizer into a socket installed in the front of the unit. a click
sound confirms the proper plugging. the card has to be inserted in a cor-
rect way (see the picture below). to remove the microsd card, it has to be
lightly hold down to sound "click", and be removed only then. the data will
not be saved if the microsd card was not inserted or its memory was full!
It is recommended to transfer the data to a PC from time to time.
The manufacturer cannot be held responsible for the data contained in
the card, card damage, nor the loss of data during the warranty period
or after its termination.
technical parameters of the memory card:
• technology – microSD
• capacity – from 1 GB to 32 GB.
the following data is stored in the card:
• instrument name and type,
• serial number,
• data and time of the process start,
21
• liquid volume,
• data and time of the process end,
• pressure and temperature development,
• status of the process finalization: STERILIZATION COMPLETE/ERROR XXX/
cancelled.
the data stored in the microsd card can be processed/opened in a Pc, us-
ing the appropriate drive/scanner for microsd card reading and the enbio
data Viewer software. the description of the enbio data Viewer software is
provided in a separate instruction.
error type solutions
memory card not make sure the memory card is properly installed
inserted in the device
memory card full Free up some space on the memory card
memory card Format the memory card using a PC-compatible
format error computer

6. SERvIcE aND MaINTENaNcE.

the case of the device does not need any special maintenance. it is suf-
ficient to wipe it with a damp cloth occasionally. this product contains
no user serviceable parts inside and thus, the user should not open the
case. opening the case by an unauthorised service personnel will void the
warranty. it is recommended to keep the process chamber clean. a small
amount of vapour is condensing on the chamber inside and dribbles to
in case of a memory card error the
appropriate information will be
displayed on the choose volume
screen. the sterilization process can
still be started using the start button,
however the process data will not be
stored.