Phone Function; Mounting And Positioning; Downloading The Photos/Videos - Num'axes PIE 1010 Guide D'utilisation

After finishing the MMS/SMTP setup, you can send the command *GH* in TEST mode to test the
SMS remote control function.

9. Phone function

Make a phone call is a new function to a traditional trail camera, it can be used in an emergency
situation.
Put the power switch in the TEST position. After the mobile phone signal shows on the LCD
screen, press the ENTER/EXIT key on the remote control, input the phone number, then press
the key to call it.
After you finish your call, press the
10.

Mounting and positioning

After you've set up the camera's parameters to your personal preferences at home or in your
truck, you're ready to take it outside and slide the power switch to "ON". When setting up the
camera for scouting game or other outdoor applications, you must be sure to mount it in place
correctly and securely. We recommend mounting the camera on a sturdy tree with a diameter of
about 6 inches (15 cm). To get the optimal picture quality, the tree should be about 16-17 feet
(5 meters) away from the place to be monitored, with the camera placed at a height of 5-
6.5 feet (1.5-2 m). Also, keep in mind that you will get the best results at night when the
subject is within the ideal flash range, no farther than 45 feet (14 m) and no closer than 10 feet
(3 m) from the camera.
You can avoid potential false triggers due to temperature and motion disturbances in front of the
camera by not aiming it at a heat source or nearby tree branches or brush (especially on windy
days).
11.

Downloading the photos/videos

To download your photos/videos to a computer, first make sure the camera power switch is in
the OFF position. Connect the supplied cable to the camera's USB port, then directly to a main
USB port on your computer.
Piège photographique / Trail camera # PIE 1010 – Guide d'utilisation / User's guide – indice A
key to hang up.
36/40