Tips For Saving Energy; Operating Noises - Junker JFGB Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en

Tips for saving energy

Install the appliance in a dry, well
ventilated room! The appliance should
not be installed in direct sunlight
or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
Do not block the ventilation openings
in the appliance.
To prevent the food from warming up
quickly in the event of a power failure
or malfunction, take ice packs from
the freezer tray and place them in
the top compartment directly on
the food.
Open the appliance as briefly as
possible!
The briefer the appliance door is
opened, the lower the ice formation on
the freezer shelves.
When thawing frozen products, place
them in the refrigerator. Use
the coldness of the frozen food
to cool food.
Regularly defrost the freezer
compartment to remove the layer of
frost!
A layer of hoarfrost will impair
refrigeration of the frozen food
and increase power consumption.
Occasionally clean
the rear of the appliance
with a vacuum cleaner or paint brush
to prevent an increased power
consumption.
26

Operating noises

Quite normal noises
Droning
Motors are running (e.g. refrigerating
units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Clicking
Motor, switches or solenoid valves are
switching on/off.
Preventing noises
The appliance is not level
Please align the appliance with a spirit
level. Use the height-adjustable feet
or place packing underneath them.
The appliance is not free-standing
Please move the appliance away
from adjacent units or appliances.
Drawers, containers or shelves wobble
or stick
Please check the removable parts
and re-insert them if required.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Jf20gb20

Table des Matières