Publicité
P O R T E R O
INSTALACIÓN BÁSICA - BASIC INSTALLATION - INSTALLATION STANDARD
ESQUEMA UNIFILAR - SINGLE-WIRED DIAGRAM - SCHÉMA À UN FIL
SECTION TABLE
Up to 100 m -
Up to 25 m -
Funcionamiento - Operation - Fonctionnement
Configure the panel as the main entrance panel (P). (See page 22)
The function activating the electric lock from the entrance panel remains enabled at all times.
SYSTEM ON STANDBY
The telephones are inactive (communication with the entrance panel and door opening functions are disabled). If the handset of a telephone is
lifted, an uninterrupted tone will be heard.
SYSTEM ACTIVE. MAKING A CALL
Only the telephone whose code is identical to the code which has been entered will receive the call. Confirmation of the call on the entrance
panel. If the handset of another telephone is lifted, intermittent tones will be heard. If the handset of the requested telephone is off the hook or
if the code does not correspond to any telephone, the panel will emit intermittent tones. When several telephones are installed in the flat, all of
them receive the call. The first telephone to be answered will establish communication with the the entrance panel.
Time setting to answer: Configurable (Position 7 from the configuration menu).
Maximum time setting for conversation: Configurable (Position 6 from the configuration menu).
During both these periods of time, the entrance panel display will show the code which has been entered.
tion des gâches de la plaque est fonctionnelle à tout moment.
D I G I TA L
-
D I G I TA L
D O O R
E N T RY
S Y S T E M S
++
230V~
-
P O R T I E R
N U M É R I Q U E
Publicité
