Before First Use; Using Your Steam Generator; Filling The Water Tank - Philips GC8600 Série Mode D'emploi

Before first use

This steam generator is intended for ironing and refreshing
fabrics only.
Remove all packaging material and stickers.
Remove the protective cover from the soleplate before you
use the steam generator.
Always place the steam generator on a stable and horizontal
surface.
Fill the water tank before every use (see chapter 'Using your
steam generator', section 'Filling the water tank').

using your steam generator

Filling the water tank

Fill the water tank before every use, when the water level in
the water tank drops below the minimum level or when the
'water tank empty' light flashes quickly.
1 Open the filling funnel lid.
2 Fill the water tank with tap water up to the MAX
indication.
3 Properly close the filling funnel lid ('click').
Do not put hot water, perfume, vinegar, starch, descaling
agents, ironing aids or other chemicals in the water tank, as
the appliance has not been designed for this.
Note: Do not tilt or shake the steam tank when the water tank is
full, otherwise water may escape from under the filling funnel lid.
EnGlish
9