Télécharger Imprimer la page

Makita PW5001C Manuel D'instruction page 9

Masquer les pouces Voir aussi pour PW5001C:

Publicité

Les langues disponibles

Les langues disponibles

Replacing dust cover brush
Replace the brush on the dust cover shortly after its tip
is damaged. To replace the brush, slide it in the direc-
tion of arrow as shown in the figure.
The dust cover is used to reduce the risk of dust intru-
sion into tool body. Be sure to use the tool with the dust
cover in place when operating. Should it be damaged,
replace it with new one without fail.
Long use and operation of the tool using much water
causes buildup of dust inside the tool. To maintain the
product safety and operate the tool with high efficiency,
always check the exhaust vent at the back of tool.
When you find buildup of dust in that area, ask Makita
service center for cleaning inside of the tool. Never
disassemble or clean the inside of the tool by yourself.
Early request for cleaning is recommended at all times.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
Abrasive discs
Side grip
Front grip
Rubber pad
NOTE:
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
9 ENGLISH

Publicité

loading