Atlantic R4GHbis-i2g Notice D'utilisation Et D'installation page 47

Restrictions
Settings
Connectivity
Main Heat.
Elem.
Presence
Sensor
Test
Radio
To exit the Expert Menu :
44

Records a maximum set temperature which cannot be
Max
exceeded. It is preset at 28°C and can be changed (from
Temperature
19°C to 28°C).
Partially or completely restricts device settings..
Access control
Enables entering a personal access code to the Expert
Menu. Once activated, access to the Expert Menu is coded.
You can write down your personal PIN here
PIN code
To disable it, return to Expert Menu, enter your personal
PIN, and return to Settings Restrictions  PIN..
The security key will secure your system
interfere with a neighboring device.
The key exchange gives you the option to associate a
Sending security
control unit
key
Enables sending the security key to a control unit
Enables receiving the security key from a control unit
Receiving
security key
connected devices.
Once key exchange is completed, this action is necessary
Authorize the
to allow the association with our brand control unit
association
Cancels all connections (devices connected together,
Reset
connection to the application, connection to a centralized
Connectivity
control unit).
Starting and running the heater for 5 minutes to check the functioning..
Activates the sensor to ensure proper operation.
Test signal
Checks proper radio communication between two devices
emission t
by sending a signal to a device and receiving by another.
If the signal is weak, there is risk of loss of communication.
Test signal
Check the system (distance and / or obstacles between
reception
devices).
to your system.
Prefer this action if devices are connected.
Connection problem between devices may
appear if security key is not transmitted to other
in order to not
.
.