Publicité
EN
water heating is switched off again.
"Thermal disinfection function" (anti-Legionella)
The anti-Legionella function is activated by default. It consists of a water heating/60°C temperature mainte-
nance cycle for 1 hour which has a thermal disinfection action on the relative bacteria.
The cycle starts when the product is started up and when it is restarted after a power outage. If the product
always functions at temperatures lower than 55°C, the cycle is repeated after 30 days. When the product
is switched off, the anti-Legionella function is deactivated. If the equipment is switched off during the anti-
Legionella cycle, the product switches off and the function is deactivated. At the end of the cycle, the use
temperature returns to the temperature previously set by the user.
Activation of the anti-Legionella cycle is displayed with AB letters (E fig. 9).
To activate/deactivate the function, hold the "mode" button for 3 s. When "U1" is displayed, press Set button.
Set "01" (to activate the function) or "00" (to disable the function) using the knob and confirm by pressing
the "set" button. To confirm activation/deactivation, the product displays "U1". Press Mode button to exit and
finish the modification.
Wi-Fi Function
Wi-Fi Setting
1. First download and install Velis APP on your mobile phone.
2. Touch the Wi-Fi button lightly and the Wi-Fi button indicator lamp will flash slowly. (Fig.11).
3. Press the Wi-Fi button again for 5 seconds, the Wi-Fi button indicator lamp will flash quickly (13 flashes
per second), meanwhile, the display will show "AP" icon. (Fig. 12).
4. Turn on the mobile phone and enable Wi-Fi. Among the Wi-Fi list, select and connect to "Remote GW
Thermo" . (Fig. 13).
5. Open "Velis Ariston NET APP" , select the user's home router account (shown as Figure 14), and input
password (shown as Figure 15). When the connection is successful, the window in Figure 16 will appear
indicating that the device is connected to the wireless network. At this time, the "AP" icon will disappear
and the Wi-Fi icon will appear on the display. Meanwhile, Wi-Fi indicator lamp will keep on.
6. Record the product serial number as the serial number is unique to each product.
7. If the connection fails, carefully check and repeat the above steps.
Note: The password cannot be Chinese characters. If there is any Chinese characters, please modify it.
Account Registration
Open the APP and click on SIGN UP; in the registration page, the user name is your email box. Set the
password and input information such as name. Be aware that the items with " * " mark are required. Finally
click on save. Open the registration reply message received in your mailbox, click on the link to activate the
user account.
Account link
Then open the APP again, enter the account number and password then click to log on.
After Sign in, fill in the nickname, country, province, city information then click on next.
When entering the following interface, input 12 digit product serial number into the position shown in the
figure 19. The serial number will be shown when connecting Wi-Fi in step 5. Meanwhile, the product serial
number is also in the plastic bag for operation instruction. When the input is complete, click "OK" to finish
the linking. Remind to read and accept the terms and condition and Privacy policy documents (mandatory).
While linking the account, the Wi-Fi function of the device must be kept enabled otherwise the connection
will fail.
APP Layout
Following functions are included (Fig. 20):
• On/off (J, Fig. 20);
• Manual, night and programming mode (L, Fig. 20);
• Number of shower button. It can be selected or deleted by light touching (N, Fig. 20);
• Communication status indicator (O, Fig. 20);
• Energy saving function button (R, Fig. 20);
26
Android version 4.0.3. minimum
iOS version 7 .1 minimum
Publicité
