Agu Wally Mode D'emploi page 50

2. Put the underpad on the scales.
Press the «ZERO» button once. The weight reading will be reset – the
3.
display will show zero. The scales are ready for measuring.
4. Carefully place the baby on the scales. The display will show the
baby's weight.
5. Press the «HOLD» button to save these readings. Thus you will be
able to compare the results with previous readings. The results and
difference with the previous measurement (if there were any) will
flash in the screen several times.
6. The scales will turn off automatically after 2 minutes. In order to
turn off the scales by force, press and hold the «ZERO» button for
3 seconds.
NOT USING THE TARE FUNCTION
Press the «ZERO» button to turn the scales on. The screen will light
1.
up white, the display will show the number of the user whose data
was saved the previous time (if this is not the first measurement),
then the zero value of weight will show. The scales are ready for
measuring.
2. Carefully place the baby on the scales. The display will show the
baby's weight.
Press the «HOLD» button to save these readings. Thus you will be
3.
able to compare the results with previous readings. The results and
difference with the previous measurement (if there were any) will
flash in the screen several times, and then the scales will turn off
automatically.
4. The scales will turn off automatically after 2 minutes. In order to
turn off the scales by force, press and hold the «ZERO» button for
3 seconds.
In the application you will have the statistics of all measurements, the graphs
of weight and height changes, as well as the comparison of your baby's
weights and height with the WHO recommended parameters.
MEASURING WEIGHT AND HEIGHT
Press the «ZERO» button to turn the scales on. The screen will light
1.
up white, the display will show the number of the user whose data
was saved the previous time (if this is not the first measurement),
50