Operating Principles And Procedures With Using The Application - Agu Wally Mode D'emploi

Silicone cover
Top limiter
*Note: if this does not happen,
make sure that the handle
is in the initial position and
press the «ZERO» button
to set the starting height
parameter of 46.0 cm and
weight parameter of 0.00 kg.
4. Carefully place the baby on the scales so that the head touches the
top limiter, and the feet touch the vertical limiter of the measurement
board.
5. The weight and height of the baby will be shown on the screen.
Press the «HOLD» button to fix this parameter.
6.
7. Take the baby off the scales and remove the underpad.
8. The scales will turn off automatically after 2 minutes. You can also press
and hold the «ZERO» button for 3 seconds to turn off the scales by force.
OPERATING PRINCIPLES AND PROCEDURES
10
WITH USING THE APPLICATION
1. Install the application.
Variant 1: go to AppStore/PlayMarket
and enter «AGU» into the search box,
then download the application.
Variant 2: for direct download scan
this QR-code.
2. Set up wireless communication
with the smartphone:
а. Before using the application make sure that wireless communication in
your phone/tablet is on.
b. Go to the «Settings» menu to turn this function on.
3. Start the application.
4. Register or login with a social network.
5. Select the device to connect to.
48
Bottom limiter