Agu Wally Mode D'emploi page 47

4. Carefully place the baby on
the scales. The display will
show the baby's weight.
6. The scales will turn off automatically
after 2 minutes. In order to turn off the
scales by force, press and hold the
«ZERO» button for 3 seconds.
NOT USING THE TARE FUNCTION
1. Press the «ZERO» button to turn the scales on. The screen will light up
white, then the zero value of weight will show. The scales are ready for
measuring.
2. Carefully place the baby on the scales. The display will show the
baby's weight.
Press the «HOLD» button to fix this parameter.
3.
4. The scales will turn off automatically after 2 minutes. In order to turn off
the scales by force, press and hold the «ZERO» button for 3 seconds.
MEASURING WEIGHT AND HEIGHT
Press the «ZERO» button to turn the scales on. The screen will light
1.
up white, and then the zero value of weight will show. The scales are
ready for measuring.
2. Pull the silicone cover out and insert the overhead limiter in its place.
3. Pull up and open the bottom limiter sideways until it clicks to put the
device into the height measuring mode. The initial value of 46.0 cm
will show on the screen.*
EN
5. Press the «HOLD» button to fix this
parameter.
47