Calibration - Gram SPX Série Manuel D'utilisation

Calibration

1. Press the
2. Press the
3. Press and hold the
message "CAL" and then the calibration weight value.
4. Place on the weighing pan the calibration weight.
5. The display will show the weight and twinkle and then the message
"PASS".
6. The calibration has been completed.
NOTE: If your balance still does not read accurately, it means that the
calibration failed and please follow the above steps to re-calibrate it again.
Please, do it on a very stable and flat surface.
10
to turn on the scale for warm-up for 1-2 minutes.
key , the display will show "0.0"
key for 3 seconds, the display will show the