Zanussi ZRS9600FA Notice D'emploi page 43

4. Turn the hinge fastener tightly to the end.
Connect harness wirings and screw ground wire.
5. Insert the water tube far into the coupling.
(Dispenser Models Only)
Replacing Refrigerator Door
1. Insert the bottom hole of refrigerator door straight
to the bottom hinge pin.
2. Let the top of door close to the cabinet and insert
the top hinge pin to the top hole of freezer door.
(Insert the back of hinge to the groove of protrusion
fi rst, then front to the top hole of door.)
3. Turn the hinge fastener tightly to the end.
Connect harness wirings and screw ground wire.
Click and screw the top hinge cover.
43