Switching Off; Malfunctions - FireWare SMOKY MULTI SOCKET Mode D'emploi Utilisateurs

User Manual
EN
FireWare Smoky Multi Socket
5.

Switching off

When the machine is in use you can stop the smoke production at any time by turning the switch on
the wired remote control off. The LED will be turned off. There are a few seconds delay between turn-
ing the appliance off and before it actually stops producing smoke.
The appliance will continue to produce smoke as long as there is smoke liquid in the tank. To preserve
the life span it is advisable to turn the FireWare Smoky Multi Socket off as quickly as possible once
the liquid has run out.
6.

Malfunctions

Problem
Appliance does not turn on
LED light is not burning
No smoke from the smoke
unit
16 FireWare Smoky Multi Socket
Possible cause
No plug in the socket
Not the right feed
On/off switch if turned off
No plug in the socket
Not the right feed
On/off switch if off
LED light is defect
No plug in the socket
Not the correct feed
On/off switch is turned off
Too much liquid in the smoke
unit
No liquid in the smoke unit
Metal needle in the smoke
unit is defect
Solution
Put the plug in an earthed socket
Use a 230 V feed
Turn the switch on
Put the plug in an earthed socket
Use a 230 V feed
Turn the switch on
Please contact FireWare
Put the plug in an earthed socket
Use a 230 V feed
Turn the switch on
Remove the plug from the socket.
Make sure the smoke unit has cooled
off
- Wipe away the liquid with a dry
cloth
- Remove the liquid with the syringe
- Let the liquid evaporate
Put the plug in the socket and turn
the switch on.
Remove the plug from the socket
Fill the smoke unit with liquid
(max.0,8 ml)
Put the plug in the socket and turn
the switch on.
Please contact FireWare
www.FireWare.nl