Publicité
Les langues disponibles
Les langues disponibles
Connecting a TV and playback component
Internet
If you have an HDMI or DVI (with HDCP) equipped
component (Blu-ray Disc player, etc.), you can connect
it to this receiver using a commercially available HDMI
cable.
If the TV and playback components support the Control
with HDMI feature, the convenient Control with HDMI
functions can be used.
"Control with HDMI
function"
• The following connection/setting is required to listen
to the sound of the TV over this receiver.
– If the TV does not support the HDMI Audio Return
Channel function, connect the receiver and TV
with audio cables (as shown).
– If the TV supports the HDMI Audio Return Channel
function, the sound of the TV is input to the
receiver via the HDMI terminal, so there is no need
to connect an audio cable. In this case, set ARC at
HDMI Setup to ON.
"HDMI Setup"
Refer to the Operating Instructions in CD-ROM for
instructions on how to connect and setup the Bluetooth
ADAPTER and how to play music.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by PIONEER CORPORATION is under
license. Other trademarks and trade names are those of
their respective owners.
Plugging the receiver
Only plug in after you have connected all your components to this receiver, including the speakers.
1
Plug the supplied power cord into the AC IN socket on the back of the receiver.
2
Plug the other end into a power outlet.
Modem
LAN
Router
3
2
1
WAN
to LAN port
LAN cable
(sold separately)
DC OUTPUT
for WIRELESS LAN
(
OUTPUT 5 V
0.6 A MAX
FM
UNBAL
75
AM LOOP
Connecting antennas
Connect FM wire antenna and the the AM loop antenna
as shown below.
AC IN
To power outlet
HDMI/DVI-compatible components
(Blu-ray Disc player, etc.)
HDMI OUT
LAN
( 10/100 )
STB IN
DVD/DVR IN
BD/BDR IN
HDMI
)
(
OUTPUT 5 V
0.1 A MAX
)
ADAPTER PORT
Bluetooth® ADAPTER
AS-BT100 or AS-BT200
(sold separately)
FM
UNBAL
75
AM LOOP
ANTENNA
CAUTION
• Handle the power cord by the plug part. Do not pull out the
plug by tugging the cord, and never touch the power cord
when your hands are wet, as this could cause a short circuit
or electric shock. Do not place the unit, a piece of furniture, or
other object on the power cord or pinch the cord in any other
way. Never make a knot in the cord or tie it with other cables.
The power cords should be routed so that they are not likely to
be stepped on. A damaged power cord can cause a fire or give
you an electric shock. Check the power cord once in a while.
If you find it damaged, ask your nearest Pioneer authorized
independent service company for a replacement.
• Do not use any power cord other than the one supplied with
this unit.
• Do not use the supplied power cord for any purpose other than
that described below.
• The receiver should be disconnected by removing the mains
plug from the wall socket when not in regular use, e.g., when
on vacation.
DIGITAL AUDIO OUT
HDMI IN
OPTICAL
OUT
COAXIAL
GAME IN
CD IN
TV IN DIGITAL AUX IN
(
VIDEO
ANALOG
ANALOG
SURR BACK/
AUDIO
AUX
)
AUX
FRONT HEIGHT
ASSIGNABLE
L
IN
( Single )
If the device you wish to connect does
not have an HDMI output terminal, it
can be connected via these terminals.
R
MONITOR
SUBWOOFER
IN
"Connecting your DVD player with
OUT
PRE OUT
no HDMI output"
Connecting your iPod/iPhone or USB
device
Switch the receiver into standby, and then connect your
iPod/iPhone or USB device to the iPod iPhone USB
terminal on the front panel.
AUDIO/ VIDEO MULTI- CHANNEL RECEIVER
INPUT SELECTOR
MCACC
iPod iPhone
HDMI
DIRECT CONTROL
iPod iPhone
USB 5 V
1 A
USB mass
storage device
USB cable (for iPod
connection)
HDMI/DVI-compatible TV
If the TV does not support
the HDMI Audio Return
Channel function, this
connection is required to
listen to the TV sound over
the receiver.
FR
A
OPTICAL
R
VSX-S500
MASTER
VOLUME
iPod/iPhone
Music
Genius
>
Playlists
Artists
Albums
Songs
Radio
Genres
Composers
Audiobooks
MENU
3
En
Publicité
