Kratki UMBRELLA Instructions D'installation Et D'utilisation page 69

PIERWSZE URUCHOMIENIE
Before using the system for the first time, make sure that all connections of the individual components
of the system have been made according to the instructions in the manual. Improper connection of
the gas control system may result in damage to the system.
For the first few kindling, a specific smell may be felt, which may persist for several hours after use. This
phenomenon is related to the burning out of paint. Animals may be particularly sensitive to the odors
emitted during the burning out of the paint. In order to speed up this process it is recommended to
heat up the device on the maximum flame size for several hours.
INSTALLATION OF THE GAS CONTROL SYSTEM
NOTE!!!
This device and the gas control system may only be installed at the factory settings.
NOTE!!!
The individual components of the gas control system should be installed according to the recom-
mendations of this manual.
The standard gas control system includes a manual control valve. The system components shall be
installed in locations designated for this purpose. Changing their position may expose the device to
damage due to harmful temperatures or flooding.
The unit may only operate with the automatics supplied with the unit. The connections of the system
components have been made in such a way as to prevent their improper connection.
ATTENTION! The device is equipped with a very sensitive anti-tilting valve. Tremor of the ground
or the device itself as a result of impact or other forces can cut off the gas supply to the device
and thus switch it off. If you notice that the device does not burn, immediately turn the knob to
the closed position clockwise and follow the instructions in the „lighting up the device" section.
ES
69