Retreiving Data - Parrot SEQUOIA Guide Utilisateur

Via an SD
Before you begin make sure that the multispectral sensor is connected
to the sunshine sensor.
1. Connect your USB key to a computer and make sure that it contains
no files in .plf format.
2. Go to the Sequoia help page: www.parrot.com/uk/support/
3. Download the update file available in .plf format.
4. Copy the file to the root directory on your SD Card without putting
it in a folder or renaming it.
5. Insert the SD card in the sunshine sensor.
6. Turn on Sequoia.
> The update runs automatically. During the update the multispec-
tral sensor light flashes orange (Diagram J). Once the update is
complete the light turns green.
Via the Sequoia web interface
1. Visit the Sequoia support page: www.parrot.com/fr/support/
2. Download the update file available in .plf format.
3. Connect to the Sequoia web interface.
4. Go to Settings.
5. Click on Update Sequoia.
> An explorer window opens.
6. Select your update file and click Open.
> A Send button appears in the Settings page.
7. Click the Send button.
> The update launches automatically.
It is recommended to transfer your data to a computer after each flight.
You can transfer your data in three different ways: via USB, via Wi-Fi
and via an SD card.
26

RETREIVING DATA

Diagram J