Siemens EQ.500 classic TP5 Série Notice D'utilisation page 36

en Troubleshooting
Fault
Coffee tastes burnt.
Coffee grounds are not com-
pact and are too wet.
36
Cause
Grinding level is set too fine.
Type of coffee is not optimal.
Coffee temperature setting
is too high.
The grinding level is not set
optimally.
Too little ground coffee.
Beans are too oily.
troubleshooting
Set a coarser grinding level.
▶
→ "Adjusting the grinding level",
Page 21
Change the coffee variety.
▶
Set the coffee temperature lower.
▶
→ "Overview of the basic settings",
Page 23
Adjust the grinder to a coarser or
▶
finer setting.
→ "Adjusting the grinding level",
Page 21
▶ Use 2 level measuring spoons of
ground coffee.
Use a different type of bean.
▶