Environmental Protection And Saving Energy; Disposing Of Packaging; Tips For Saving Energy; Installation And Connection - Siemens EQ.500 classic TP5 Série Notice D'utilisation

en Environmental protection and saving energy
Environmental protection
E n v i r o n m e n t a l p r o t e c t i o n a n d s a v i n g e n e r g y
and saving energy
Help protect the environment by us-
ing your appliance in a way that con-
serves resources and by disposing of
reusable materials properly.

Disposing of packaging

The packaging materials are environ-
mentally compatible and can be re-
cycled.
Sort the individual components by
▶
type and dispose of them separ-
ately.
Information about current disposal
methods are available from your
specialist dealer or local authority.

Tips for saving energy

If you follow these instructions, your
appliance will use less power.
Set the interval for automatic switch-
off to the smallest value.
If the appliance is not being used,
it will switch itself off earlier.
→ "Basic settings", Page 23
Do not interrupt the dispensing pro-
cess prematurely.
The amount of water or milk that is
heated is used optimally.
Descale the appliance regularly.
Limescale deposits increase the
appliance's energy consumption.
12
Installation and connec-
I n s t a l l a t i o n a n d c o n n e c t i o n
tion
You can find out where and how best
to install your appliance here. You
will also learn how to connect your
appliance to the power supply.

Scope of delivery

After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
→ Fig.
1
A
Fully automatic coffee machine
B
Milk tube and suction pipe
C
Instruction manual
D
Cleaning tablets
E
Descaling tablets
F
Water hardness testing strip
G
Water filter
1
Depending on the appliance specifications
Installing and connecting the
appliance
ATTENTION!
Risk of damage to the appliance. If
the appliance is not started up cor-
rectly, it may be damaged.
▶
Use the appliance in frost-free
rooms only.
▶
If the appliance has been transpor-
ted or stored below 0 °C, wait
3 hours at room temperature be-
fore starting it up.
▶
After plugging in, always wait ap-
prox. 5 seconds.
Remove the protective film.
1.
1
1
1