Chauvin Arnoux F607 Guide De Démarrage page 15

Clamp Multimeter F607
1.4 THE TERMINALS
The terminals are used as follows:
1 2
2.1 COMMISSIONING
Insert the batteries supplied with the device as follows:
1. Using a screwdriver, unscrew the screw of the battery compartment cover (item 1)
on the back of the housing and open it.
2. Place the 4 batteries in the compartment (item 2), taking care to get the polarities
right.
3. Close the battery compartment cover and screw it to the housing.
1 1
Item Function
1 Cold terminal (COM)
2 Hot terminal (+)
2 USE
2
English