SATA jet 3000 B Mode D'emploi page 498

Operating Instructions SATAjet 3000 B RP/HVLP (DIGITAL)
6.3. Personal Protection Equipment
• When using, cleaning or maintaining the spray gun, always wear
approved breathing and eye protection equipment as well as
suitable protective gloves, overalls and safety boots!
• When using the paint spray gun, noise levels of 85 dB(A) may be
exceeded. Wear suitable hearing protection!
The painter is not exposed to vibrations while using the spray gun. Repul-
sive forces are minimal.
6.4. Use In Explosive Areas
Ex-sign Equipment cat-
egory
6.4.1 General
The paint spray gun is approved for the use / storage in explosive areas
of Ex-Zone 1 and 2.
• The following applications and operations lead to the loss
of the explosion protection and are, therefore, prohibited:
• Use of the paint spray gun in explosive areas belonging to ex-zone 0!
• Do not use solvents and cleaning agents based on halogenised
hydrocarbons! Chemical reaction which may occur when using these
substances may be explosive!
Warning!
Device category
Warning! Risk of explosion!
Gas category Temperature clas-
US
sification
491