Beurer medical BM 35 Mode D'emploi page 13

Application part type BF
Direct current
Disposal in accordance with EC Directive
WEEE (Waste Electrical and Electronic Equip-
ment).
Manufacturer
Storage Permissible storage temperature and humi-
dity
Permissible operating temperature and humi-
Operating
dity
Protect from moisture
Serial number
SN
The CE labelling certifies that the product
complies with the essential requirements of
Directive 93/42/EEC on medical devices.
Advice on use
• In order to ensure comparable values, always measure your
blood pressure at the same time of day.
• Before every measurement, relax for about five minutes.
• If you want to perform several measurements on the same
person, wait five minutes between each measurement.
• Do not take a measurement within 30 minutes after eating,
drinking, smoking or exercising.
• Repeat the measurement if you are unsure of the measured
value.
• The measurements taken by you are for your information
only – they are not a substitute for a medical examination!
Discuss the measurements with your doctor, and never base
any medical decisions on them (e.g. medicines and their
administration)!
• Do not use the blood pressure monitor on newborns, preg-
nant women or patients with preeclampsia.
• Cardiovascular diseases may lead to incorrect measure-
ments or have a detrimental effect on measurement accu-
racy. The same also applies to very low blood pressure, dia-
betes, circulatory disorders and arrhythmias as well as chills
or shaking.
• The blood pressure monitor must not be used in connection
with a high-frequency surgical unit.
• Only use the device on people who have the specified upper
arm measurement for the device.
• Please note that when inflating, the functions of the limb in
question may be impaired.
• During the blood pressure measurement, blood circulation
must not be stopped for an unnecessarily long time. If the
device malfunctions, remove the cuff from the arm.
• Avoid any mechanical restriction, compression or bending of
the cuff line.
13