Sony VPL-DX10 Guide De Référence Rapide page 37

Cleaning the Air
Filter
The air filter should be cleaned after
approximately 500 hours use. Remove the
air filter cover then remove the dust with a
cloth lightly dampened with mild detergent
solution.
The time needed to clean the air filter will
vary depending on the environment or how
the projector is used.
1
Turn the power off and unplug the AC
power cord.
2
Place a protective sheet (cloth) beneath
the projector and turn the projector over.
3
Remove the air filter cover.
4
Remove the filter inside, and then wipe
its dust with mild detergent.
5
Return the filter to the air filter cover.
6
Return the air filter cover.
Notes
• If the dust cannot be removed from the air
filter, replace the air filter with a new one.
• For details on new air filter, consult with
qualified Sony personnel.
• Be sure to attach the air filter cover firmly; it
may cause a problem if the air filter cover is
not installed properly.
Bottom
Cleaning the Air Filter
17
GB