Observe Room Temperature; Installing The Appliance - Siemens KI-N Série Notice D'utilisation

en
Observe room
temperature
The appliance is designed for a specific
climatic class. Irrespective of the climatic
class, the appliance can be operated at
the following room temperatures.
The climatic class can be found on the
rating plate at the bottom left hand side
in the appliance.
Climatic class
SN
N
ST
T
Ventilation
Fig. 1/23
Conduction of the heated air must not be
obstructed. Otherwise, the refrigerating
unit must work harder. This increases
power consumption.
Therefore: Never cover or block ventilation
opening!
26
Ambient temperature
+10 °C to 32 °C
+16 °C to 32 °C
+16 °C to 38 °C
+16 °C to 43 °C

Installing the appliance

Install the appliance in a dry, well
ventilated room. The installation location
should neither be exposed to direct
sunlight nor near a heat source, e.g.
a cooker, radiator, etc. If installation next
to a heat source is unavoidable, use
a suitable insulating plate or observe the
following minimum distances to a heat
source:
3 cm to electric or gas cookers.
30 cm to an oil or solid fuel cooker.