Yamaha HAIBIKE PW45 Notice Originale D'utilisation page 94

74 - English
BATTERY PACK AND CHARGING PROCEDURE
Lock-release ring
Key lock
Battery handle
6. See "Reading the charging status", and check that the
7. The battery capacity display lamps will light up one by
8. Confirm that charging is complete, and then discon-
9. Place the cap on the battery pack's charging connec-
10. Mount the battery pack on the bicycle.
Top of the case
TIP
Battery bottom
Mounting method of the battery pack
• Insert the battery in the direction of the arrow so that
• Insert the upper part of the battery in the direction of
• Press the upper part of the battery toward the frame
battery charger is charging the battery pack.
one until all four are on. Then, when charging is com-
plete, all of the lamps will go off.
nect the charging plug from the battery pack.
How to disconnect the plug (see the left figure)
Grasp the lock-release ring.
Pull it out straight.
tor.
the battery bottom is aligned to the top of the case.
the arrow so that the battery handle is aligned to the
top of the key lock.
until it clicks into place to secure it.
25