AEG BSS 4833 Mode D'emploi page 32

English
32
Disconnecting the speakers
/ button on the "Slave". The
• Press and hold the
"Master" will be disconnected. If playing music while
doing so, playback continues through the "Master".
• In order to reconnect both speakers, stop music playback
on the "Master". Switch the "Slave" off and on again.
Both speakers will be connected automatically.
Playing back music files
There are two ways to play music files: using a cable or cord-
less via Bluetooth.
By cable
1. Flip the rubberized cover open.
2. Connect the 3.5 mm stereo cable to an external audio
source. If required, use a suitable adapter (not included).
3. Insert the other end of the cable into the LINE IN jack on
the unit.
4. The device activates AUX mode automatically. The BT/
LINE indicator lamp lights up red.
5. Start the playback of your audio source.
6. For the further procedure, please refer to the user manual
of the external audio source.
Keep the rubberized cover closed when not in use.
NOTE:
• If possible, adjust the volume of the external unit to a
comfortable level.
• Paired operation will require an appropriate adapter
cable. (Adapter cable not included.)
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
NOTE:
Make sure no cable is connected to the LINE IN socket.
Bluetooth will be deactivated automatically, if an audio
cable is being connected.
• Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
2. Switch off one or both speakers. The device will beep
several times and the BT/LINE indicator lamp (11)
will flash blue. This indicates that the unit is in pairing
mode.
3. Choose the Bluetooth menu in your player and
register the device in your player. For this, refer to the
operation manual of your player. The device "AEG
BSS 4833" will show in your player as a selection.
NOTE:
• If both speakers have been connected for
paired operation, only the BT/LINE indicator
lamp on the "Master" will flash.
• Only one playback unit can be connected to
the speaker. If the speaker is already connected
to another playback unit, the speaker will not
appear in the BT selection menu.
4. Now enter the password "0000" in your player,
depending on the device manufacturers, model, and
software version.
When the pairing was successful, a beep can be heard and
the indicator lamp (11) lights blue.
For the further procedure, please refer to the user manual
of the playback unit. If possible, adjust the volume of the
external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In the case of problems with the pairing of a playback
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.