Fleetsync; Selcall (Selective Calling) - Kenwood TK-2312 Mode D'emploi

FleetSync is an Alphanumeric 2-way Paging Function and is a
protocol owned by JVC KENWOOD Corporation.
Note:
◆ Your transceiver functions include either 5-tone Signaling or
FleetSync/ MDC-1200, but not both.
◆ MDC-1200 and FleetSync cannot be operated simultaneously.
However, they can be programmed for different zones.

SELCALL (SELECTIVE CALLING)

A Selcall is a voice call to a particular station or to a group of
stations.
■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as [Selcall] or [Selcall +
Status] to enter Selcall mode.
• The last selected station ID appears on the display.
3 Press the <B or C> key to select the ID of the station
you want to call.
4 Press the PTT switch and begin your conversation.
• Alternatively, you can press the Side 2 key to page the
selected station, rather than making a voice call.
■ Receiving
An alert tone will sound, the transceiver will automatically
enter Selcall Mode, and the calling station's ID will appear
when a Selcall is received.
To respond to the call, press the PTT switch and speak into
the microphone.
■ Identifi cation Codes
An ID code is a combination of a 3-digit Fleet number and
a 4-digit ID number. Each transceiver must have its own
Fleet and ID number.
Note: The ID range may be limited by programming.
16

FleetSync