Other Functions; Tape Counter (Zero Search) - Marmitek TLV 9600 Notice D'utilisation

Other Functions

• When you insert a cassette, the
counter always resets to zero.
• There is no tape counter
indication for the blank portions
of tape.
• In the 2-hour(NTSC), 3-hour
(PAL) recording speed mode
only, the tape counter indicates
real hours, minutes and
seconds.
• In the other SP recording speed
modes(24H, 36.....960H), the
tape counter indication is a
ratio of the 2-hour mode base
indication.(In 24-hour recording
mode, each "second" of the
tape counter actually represents
approximately 24/2 = 12 real
seconds.) (NTSC ONLY)
• In the other EP recording speed
modes(18H), the tape counter
indication is a ratio of the 6-
hour mode base indication.(In
18-hour recording mode, each
"second" of the tape counter
actually represents
approximately 18/6 = 3 real
seconds.) (NTSC ONLY)
• In the other recording speed
modes(12H, 18, 24.....960H), the
tape counter indication is a
ratio of the 3-hour mode base
indication.(In 24-hour recording
mode, each "second" of the
tape counter actually represents
approximately 24/3 = 8 real
seconds.) (PAL ONLY)
• There may be a slight
discrepancy between the
position shown on the tape
counter and the actual tape
position.
• When rewinding the tape past
the "0H 00M 00S" position("0H
00M 00S" on the display panel),
a minus(-) displayed.

Tape Counter (Zero Search)

Using the counter, it is easy to find a desired recording.
1 Press the CLEAR button, at the beginning of the desired
recording.
• The counter will be reset to "0H 00M 00S" (on screen).
• The counter will be reset to "0H 00M 00S"(on the display panel).
2 After recording or playback, press the Menu button to display
the initial menu.
3 Press the SHIFT
Search Select.
4 Press the SHIFT
The SEARCH SELECT menu is displayed.
5 Press the SHIFT
Search.
6 Press the SHIFT
00S"("0H 00M 00S" on the display panel).
• The display returns to the normal screen.
• The tape is rewound or advanced to the counter "0H 00M 00S"
reading("0H 00M 00S" on the display panel).
27
button to move the arrow mark ( ) to
button to display the SEARCH SELECT menu.
button to move the arrow mark ( ) to Zero
button to search the counter "0H 00M