Alarm Scan; Zero Search - Marmitek TLV 9600 Notice D'utilisation

• The display returns to the normal screen.
• The VCR will locate the desired alarm recording and begin
playback.

Alarm Scan

1 Repeat steps 1 to 2 of Time/Date Search.
2 Move the arrow mark ( ) to FF or REW in Alarm Search Mode.
3 Press the SHIFT
without entering a specific alarm number.
• The display returns to the normal screen.
• The VCR will advance (or rewind) the tape at high speed, and
playback the first 5 seconds of every alarm recording.
• To cancel the alarm scan mode, press the STOP button.
4 While the desired recording is being played back, press the PLAY
button.
• Playback will start, and alarm scan is cancelled.

Zero Search

1 Repeat steps 1 to 2 of Time/Date Search.
2 Press the SHIFT ( ) to move the arrow mark ( ) to Zero
Search.
3 Press the SHIFT
position.
26
button to search forward or in reverse
button to rewind the tape to the zero