Time/Date Search; Alarm Search - Marmitek TLV 9600 Notice D'utilisation

• The start time in Time/Date
Search can be different
according to its recording mode.
• Only the date/hour except
minute/second can be searched
in SEARCH SELECT screen.

Time/Date Search

1 Press the Menu button to display the initial menu.
2 Press the SHIFT
the SHIFT button to display the SEARCH SELECT menu.
3 Move the arrow mark( ) to "Time" in the Time/Date Search
mode as you want to search.
4 Press the SET - (or +) button to enter the time as you want to
search.
5 Press the SHIFT
press the SET - (or +) button to enter the date as you want to
search.
6 Press - (or +) button to proceed in reverse (or forward) direction.
• The display returns to the normal screen.
• The VCR will advance (or rewind) the tape at high speed.
• To cancel the Time/Date Search mode, press the STOP button.
7 While the desired recording is reached, press the PLAY button.
• Playback will start, and Time/Date Search is cancelled.

Alarm Search

1 Repeat steps 1 to 2 of Time/Date Search.
2 Move the arrow mark( ) to search number.
3 Press the SET -(or +) button to enter the number of alarm marks
you want to search.
4 Press the SHIFT
to proceed in reverse (or forward) direction.
25
button to select Search Select, then press
button to move the cursor to "Date", then
button to select FF or REW, then press - (or +)