Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LoRaWAN 863-870 ANALOG - Guide utilisateur / User guide version V2.0.1
S255
Configuration Channel 5
S256
Configuration Canal 6
S257
Configuration RX2
FR
S260
RESERVED
S261
RESERVED
EN
S280
NETWORK ID
S281
DEVICE ADDRESS
NOTE 1 :
The «Over The Air Activation» (OTAA) mode uses a join phase before being able to transmit on the network. This mode uses the APP_EUI (S214
and S215) and APP_KEY (S216 to S219) codes during this phase to create the keys for network communication.
Once this phase is completed, the codes APP_sKEY, NWK_sKEY and Device address will be present in the corresponding registers.
A new join phase is started every time the product comes out of Command mode, a reset is performed or the product is turned on.
Codes:
• APP_EUI identifier for global use (provided by default by adeunis®)
• APP_KEY device application key (provided by default by adeunis®)
The «Activation by personalization» (ABP) mode has no join phase; it transmits directly on the network using the codes NWK_sKEY (S222 to
S225), APP_sKEY (S226 to S229) and Device address (S281) to communicate.
Codes:
• NWK_sKEY network session key (provided by default by adeunis®)
• APP_sKEY applicative session key (provided by default by adeunis®)
• DEVICE ADDRESS Address of the device in the network (provided by default by adeunis®)
NOTE 2 :
By default, channels 0 to 2 use the default settings of the LoRaWAN network; the other 4 channels are inactive. A register value different from 0
or 1 allows the channel to be configured as follows:
Bit
Description
Exemple
Data Rate value (DR)
0
1
2
3
4
5
6
7
The example given allows the user to configure a frequency of 868.1 Hz and authorizes a SF 7 to 9. The command to be sent to perform this
operation is: ATS250=86810053<cr>
7
6
Description
SF12
SF11
SF10
SF9
SF8
SF7
SF7 – BW 250kHz
FSK 50 kps
Decimal
Default: 0 (868); 1 (915)
0: Canal deactivated
Other: User Configuration (NOTE2)
Decimal
Default: 0
0: Canal deactivated
Other: User Configuration (NOTE2)
Decimal
Default: 1
0: Canal deactivated
1: Default LoRaWAN configuration
Other: User configuration
Decimal
Value: 2200
Do not change this value
Decimal
Value: 3600
Do not change this value
Hexadecimal
0 Defaults
Read-only
Hexadecimal
Default: 0
5
4
Channel frequency
868100
3
2
DR Max
1
0
DR Min
5
3
Page
72
of 90
Publicité
Table des Matières
