Jaga Mini Canal Hybrid Manuel D'installation page 57

6.1. DPC.MD45 (
O
The unit starts at the last selected speed(1, 2 or 3), as soon as the water temperature > 28 ̊ C .
Only with configuration code DPC.MD45
The unit starts at the last selected speed(1, 2 or 3), as soon as the water temperature < 20 ̊ C .
O
All functions are disabled until the user switches on the unit via the control panel.
3 speeds. Activator speed is set according to the unit's length.
6.1.1. Control
Press the button until the desired mode is reached
(± 3 sec.).
Red LEDs are flashing: the water temperature of the
supplied water is too low(Tw < 28 ̊ C ).
Blue LEDs are flashing: the water temperature of the
supplied water is too high (Tw > 20 ̊ C ).
Manually raising / lowering the fan speed:
MODE 1 2 3
Speed: 1
MINI CANAL HYBRID | MANUAL | 09 06 2020, 09:44
MODE 1 2 3
O
) / OPTION: DPC.MD44 (
[4]
Optie
Power Supply
Input: 110-240V - 50/60 Hz
Output: 12V
VDC VAC
230 V / 50 Hz 230 V / 50 Hz
MODE 1
MODE 1
Speed: 2
MODE 1
O
)
The user manually selects the
desired mode via the control
panel The unit can run at 3
speeds. The unit starts as
soon as the set water tempe-
rature has been reached.
3"
3"
3"
2 3
Only with configuration code DPC.MD45
2 3
2 3
O
verwarmen
MODE 1 2 3
koelen
MODE 1 2 3
MODE 1 2 3
Speed: 3
57
MODE 1 2 3
EN