Product Description; Operation; Operational Limits; Parts - Jaga Mini Canal Hybrid Manuel D'installation

3. PRODUCT DESCRIPTION
3.1. OPERATION
.The Mini Canal draws in the ambient air by means of the axial fans.
In the heating mode, the drawn in air is heated inside the heat exchanger and then blown back into
the room through forced convection.
In the cooling mode, the drawn in air is cooled inside the heat exchanger until it reaches the dew
point of the ambient air(in order to prevent condensation), and then blown back into the room.
It is important to note that the cooling water in the device is never colder than the dew point of the
ambient air. This is to prevent condensation from forming in the heat exchanger. The Mini Canal
Hybrid does not come equipped with a condensate drain.
The occurrence of condensation at too low temperatures will cause damage to the device and its
surroundings.
The system's dew point control via the water temperature control is part of an external fitting techni-
que that is not done by Jaga and is therefore not Jaga's responsibility .

Operational limits

– Mains voltage: 12V of 230V
– Max. pressure heat exchanger: 10 bar
– power supply voltage: 12V
– Control voltage: Max.10V DC
EN
3.2. PARTS
Various grille models
Optional integrated power
supply / separate adapter
JDPC.002 control device
with control panel
Water temperature sensor
Aluminium Z-profile /
L-profile
Low-H2O heat exchanger
DBE unit
Anchorage
Housing
Optional height adjusters
with sound decoupling
drain cocks
MINI CANAL HYBRID | MANUAL | 09 06 2020, 09:44
51