Levven LA-SR50 Instructions De Fonctionnement page 4

3.4 FRONT PANEL
Power
LED
Power
LED
Gear
Button
3.4.1 POWER LED
The power LED indicator will be lit bright red when Soul Bar is powered on and active.
When this LED is off, it indicates Soul Bar is powered off.
When the power LED is a dim red, Soul Bar is in low-power standby mode.
3.4.2 GEAR BUTTON
Power SKAA Bond
LED LED
Hold this button to power off Soul Bar. Click this button to wake Soul Bar from off or
standby state.
When Soul Bar is awake, click this button to cycle through the modes – SKAA receive,
Bluetooth, Bluetooth relay. See section 4 for more details.
Gear
Button
3.4.3 SKAA BOND LED
This red-green dual color LED indicates several states of the SKAA receiver. See section 4.7
for more details.
3.4.4 SKAA BOND BUTTON
This button allows several interactions with the SKAA receiver. See section 4.7 for more
details.
3.4.5 BLUETOOTH LED
Gear SKAA Bond
When on solid and bright, this blue LED indicates Soul Bar is in Bluetooth receive mode
Button Button
and has an active connection. When flashing, it indicates a Bluetooth pairing is in prog-
ress. When on solid and dim, it indicates Soul Bar is attempting to connect to a Bluetooth
device.
SKAA Bond Bluetooth
LED LED
SKAA Bond Bluetooth
LED
SKAA Bond Bluetooth
Button Button
Bluetooth
LED
SKAA Bond Bluetooth
Button Button
Bluetooth
Button
Relay
LED
Relay
LED LED
Volume - Volume +
Button Button
Relay
LED
Volume -
Button
Volume - Volume +
Button Button
Volume +
Button
4