Publicité
Les langues disponibles
Les langues disponibles
of the fault and make the necessary changes. If you are unable to get sound from Soul Bar, refer to giv-
en suggestions for following conditions:
5.1
POWER LED IS NOT ON
No main power to Soul Bar. Check AC power connections at the amplifier and the AC outlet.
5.2
NO SOUND
If the product is getting AC power, but is producing no sound, check the Power LED. If Soul Bar's
SKAA Bond LED is dim, it means that Soul Bar is seeking connection, check the following condi-
tions,
• Is Soul Bar bonded to a wireless streaming device?
• Is the streaming device turned on?
• Is audio playing on the wireless streaming device?
• Is the streaming device on mute?
• Is the volume on the streaming device set too low?
• Is audio playing on the wired device?
• Is the volume on the wired device set too low?
Note: Soul Bar allows only one connection at a given time to play music. If a device is already
bonded with Soul Bar and you are trying to play music from another source, disconnect the de-
vice which is currently bonded with Soul Bar before bonding the desired device with Soul Bar to
play music.
If the SKAA Bond LED is on bright solid, it means Soul Bar has successfully bonded with a device,
check all connections and control settings on associated components.
5.3
TROUBLE WITH SKAA
https://skaa.com/tlc can help you on issues with SKAA receivers, troubleshooting, SKAA transmit-
ters, and the SKAA "cmd" app.
6.
SPECIFICATIONS
Peak Output Power
Continuous Output Power
Frequency Response
Mid-Range Driver x 4
Tweeter x 2
Input Power Requirements
Max Current Consumption
Dimensions (WxHxD)
Weight (net)
Power cord
All specifications are accurate at the time of printing. Levven reserves the right to make improve-
ments without notice.
100 watts
84 watts
80 to 20 kHz
Impedance: 8 ohms
Diameter: 78.5 mm
Impedance: 4 ohms
Diameter: 25.4 mm
100V-240 VAC 50/60 Hz
1A
955 X 100 X 112 mm
5.61 kg
Detachable, two-conductor US, black
12
Publicité
