Model Designation - Hatco HWBI Série Manuel D'installation

IMPORTANT SAFETY INFORMATION
NOTICE
Do not use steel wool or metal scouring pad for cleaning.
Steel wool will scratch the finish.
Use non-abrasive cleaners and cloths only. Abrasive
cleaners and cloths could scratch finish of unit, marring its
appearance and making it susceptible to soil accumulation.
Do not use harsh chemicals such as bleach, cleaners
containing bleach, or oven cleaners to clean this unit.
Damage caused by chemicals is not covered by warranty.

MODEL DESIGNATION

Heated Well Built-In
No Character = Standard Watt
Insulated Top Mount
No Character = Full-Size Pan
43 = 4/3 Size Pan
H W B L I x - x x A
L = Low Watt
Unit must be allowed to cool down to room temperature
before changing from wet-to-dry or dry-to-wet operation.
Allowing unit to run dry during wet operation or adding
water during dry operation will damage unit.
Drain sealants must have temperature rating of 500°F
(260°C) or higher. Incoming water pipes must be FDA
compliant for potable water.
No Character = Without Auto-Fill
A = Auto-Fill Equipped
D = Individual Drain Equipped
M = Manifold Drain Equipped
No Character = No Drain
Pan Capacity
4
English
NOTICE
Form No. HWBIM-0820