Husqvarna LC 137i Manuel D'utilisation page 10

Masquer les pouces Voir aussi pour LC 137i:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 156
This reduces the chance of injury to the feet from
contact with the moving blade.
While operating the lawnmower, always wear long
trousers. Exposed skin increases the likelihood of
injury from thrown objects.
Do not operate the lawnmower in wet grass. Walk,
never run. This reduces the risk of slipping and
falling which may result in personal injury.
Do not operate the lawnmower on excessively steep
slopes. This reduces the risk of loss of control,
slipping and falling which may result in personal
injury.
When working on slopes, always be sure of your
footing, always work across the face of slopes, never
up or down and exercise extreme caution when
changing direction. This reduces the risk of loss of
control, slipping and falling which may result in
personal injury.
Use extreme caution when reversing or pulling the
lawnmower towards you. Always be aware of your
surroundings. This reduces the risk of tripping during
operation.
Keep the supply cord away from the cutting blades.
A damaged supply cord may result in electric shock,
fire and/or serious injury.
Switch off and remove plug from mains if the cord is
entangled or damaged. Entangled or damaged cords
can increase the risk of electric shock.
Do not touch blades and other hazardous moving
parts while they are still in motion. This reduces the
risk of injury from moving parts.
When clearing jammed material or cleaning the
lawnmower, make sure all power switches are off
and the power cord is disconnected. Unexpected
operation of the lawnmower may result in serious
personal injury.
Residual current device
Use a residual current device with a tripping current
of maximum 30 mA.
General safety instructions
WARNING:
instructions that follow before you use the
product.
This product is dangerous if used incorrectly or if you
are not careful. Injury or death can occur if you do
not obey the safety instructions.
This product produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury we recommend persons with medical
implants to consult their physician and the medical
implant manufacturer before operating this product.
Always be careful and use your common sense. If
you are not sure how to operate the product in a
10
Read the warning
special situation, stop and speak to your Husqvarna
dealer before you continue.
Keep in mind that the operator will be held
responsible for accidents that involve other persons
or their property.
Keep the product clean. Make sure that you can
clearly read signs and decals.
Never allow children or people unfamiliar with these
instructions to use the appliance. Local regulations
may restrict the age of the operator.
Always monitor a person, with decreased physical
capacity or mental capacity, that uses the product. A
responsible adult must be there at all times.
Do not use the product if you are tired, ill, or under
the influence of alcohol, drugs or medicine. This has
a negative effect on your vision, alertness,
coordination and judgment.
Do not use the product if it is defective.
Do not change this product or use it if it is possible
that it has been changed by others.
Work safety
WARNING:
instructions that follow before you use the
product.
Use this product to cut grass lawns only. It is not
permitted to use it for other tasks.
Use personal protective equipment. Refer to
Personal protective equipment on page 11 .
Make sure that you know how to stop the motor
quickly in an emergency.
Do not operate the product in rain or wet conditions.
The risk of electrical shock increases if water enters
the product.
Do not operate the product unless the blade and all
covers are attached correctly. An incorrectly
attached blade can come loose and cause personal
injury.
Make sure that the blade does not hit objects such
as stones and roots. This can do damage to the
blade and bend the motor shaft. A bent axle causes
heavy vibration and a very high risk that the blade
becomes loose.
If the blade hits an object or if vibrations occur, stop
the product immediately. Stop the motor, turn the
safety key to 0 and remove the battery. Wait until
moving parts stop. Examine the product for
damages. Tighten loose parts. Repair damages and
replace damaged parts. Let an approved service
agent do the repair.
Never attach the motor brake handle permanently to
the handle when the motor is started.
Put the product on a stable, flat surface and start it.
Make sure that the blade does not hit the ground or
other objects.
Always stay behind the product when you operate it.
Read the warning
1574 - 006 - 26.11.2021

Publicité

Table des Matières
loading

Table des Matières