AudioSonic DV-1822 Mode D'emploi page 4

CHARGE THE BUILT-IN BATTERY
The player is with a rechargeable lithium battery. Before using
the battery, please make sure it is charged. If not, charge it
first. Slide the power switch to OFF position and then connect
one end of the supplied adapter to the wall outlet and the
other end to the unit for charging the built-in battery.
Note:
1. The battery only could be charged at powering off mode.
2. If the unit is not in use for a prolonged period of time, it is
recommendable to charge the built-in battery each three
months.
CONNECTING TO A CAR ADAPTOR
The car power adaptor is designed for use with vehicles that
have a 12V, negative ground electrical system.
WARNING:
Disconnect the car power adaptor when not in use. Not in use
in 24V vehicles.
To the cigarette lighter socket
CAUTIONS:
Use the unit only with the recommended car power adaptor,
use with other car power adaptor might damage the unit.
The recommended car power adaptor is for use with this
unit only. Do not use it with other equipment.
In the interests of road traffic safety, do not operate the unit
or view video software while driving a vehicle.
Make sure the unit is fastened securely to prevent from
moving outside of the vehicle in an accident
When the inside of the cigarette lighter socket is dirty with
ashes or dust, the plug section may become hot due to
poor contact. Be sure to clean the cigarette lighter socket
before use.
After use, disconnect the car power adaptor from both the
unit and cigarette lighter socket.
FUSE REPLACEMENT
FUSE
POSITIVE(+) CAP
NOTE: Don't throw out the positive(+) cap when replace the
fuse.
OPERATIONS
PREPARATION
Power on the TV set and select video input mode.
Power on the audio system which is connected to the player.
GET STARTED
1. Slide POWER switch to turn on the player.
2. Open the disc tray by hand.
3. Place a disc onto the disc tray.
4. Close the disc tray by hand and the playback starts
automatically.
5. When a menu screen appears on the TV, move the
navigation buttons or press the numeric buttons to select a
preferred track number, then press ENTER/OK button to
start playback.
ADJUST THE VOLUME
Press the VOLUME+/- button on the remote or press and hold
VOL+/- button on the unit to increase or reduce the volume.
MUTE
While the power is on, the audio output of the main unit is to
be shut off by pressing the button. Press it again to resume
sound output.
SKIP AHEAD OR BACK
Press PREV button during play to skip previous chapter (DVD)
or a track (CD), Press NEXT button during play to skip next
chapter (DVD) or a track (CD).
COLOR AND BRIGHTNESS ADJUSTMENT (FOR THE LCD
SCREEN)
Press TFT SET button on the remote repeatedly to adjust the
color intensity and brightness respectively via navigation
left/right button.
Press and hold this button for a moment to turn on or off the
TFT display.
RAPID ADVANCE/REVERSE
During playback, press and hold F.FWD button or F.BWD
button on the unit or press these two buttons on the remote
respectively to scan the disc forward or backward at X2, X4,
X8, X20 normal speed.
Press PLAY button to resume normal play.
PAUSE/STEP PLAY
Press pause/step button during playback to pause. During
pause mode, each time the pause/step button is pressed, the
player will only play one frame; to resume normal play, press
play button.
STOP PLAYBACK
Press STOP button during playback to stop playback; the
player activates its resume function when STOP is pressed in
STOP mode; press PLAY button again, playback resumes at
the point it stopped previously; open the disc tray or press the
STOP button one more time to clear the resume function.
SLOW-MOTION PLAY (DVD)
Press SLOW button during playback, the disc will be played
at 1/2 normal speed at first, each time this button is pressed,
the play speed becomes slower (down to 1/7 normal speed.)
Press PLAY button, normal play will resume.
GB-3