AudioSonic DV-1822 Mode D'emploi page 3

REMOTE CONTROL UNIT:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1. MUTE button
2. VOLUME+ button
3. VOLUME- button
4. REPEAT 1/ALL&A-B button
5. MENU button
6. SUBTITLE button
7. PLAY button
8. TITLE button
9. AUDIO button
10. PAUSE/STEP button
11. F.BWD button
12. F.FWD button
13. ANGLE button
14. ZOOM button
15. DISPLAY button
16. SETUP button
17. TFT SET button
18. NUMERIC buttons
19. CLEAR button
20. STOP&DVD/SD/USB button
21. ENTER button
22. NAVIGATION buttons
23. SLOW button
24. NEXT button
25. PREVIOUS button
26. SEARCH button
27. PROGRAM button
BASIC CONNECTION
It is recommended to connect a multi-system TV.
Ensure that this player and other equipment to be
connected are set to OFF mode and disconnect the AC
power cords before commencing connection.
Do not block ventilation holes of any of the equipment and
arrange them so that air can circulate freely.
Read through the instructions before connecting other
equipment.
Ensure that you observe the color coding when connecting
audio, video cables. If the RCA adapter is supplied only, the
audio/video RCA cable is required. Plug one end of the
15
RCA adapter to the unit. Then connect the audio/video
16
RCA cable to the RCA adapter and the television.
17
Note:
During DVD play, the TV volume may be at a lower level
than during TV broadcasts, etc. If this is the case, adjust
the volume to the desired level.
18
If the DVD/CD player is connected to the TV through a
video cassette recorder, the picture may not be played
back normally with some DVDs. If this is the case, do not
connect the player via the VCR.
19
The mother unit of the DVD player is designed to be
used both for indoor and in-car, the slave is only for
21
in-car usage.
22
CONNECTING TO A STEREO TV SET
23
24
AUDIO R AUDIO L VIDEO IN
25
AV AUDIO/VIDEO INPUT
27
After connection is firmed and securely done, plug AC
ADAPTER to an applicable wall outlet and turn on the player.
CONNECTING TO AN AFFILIATED SCREEN
This unit is equipped with another affiliated screen, you can
use the affiliated screen and player to appreciate the
programme at the same time, the connecting method is
illustrated as below using the in car adapter.
GB-2
S-VIDEO
YUV INPUT
A/V cable
Slave screen connector
To the cigarette lighter socket
TV SET