Télécharger Imprimer la page

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Liens rapides

VDP575MHS16 – PROFESSIONAL 16-CHANNEL MOVING HEAD CRUISER 575
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VDP575MHS16! It should come with an XLR connection cable, a safety cable with a hook
and this manual. If the device was damaged in transit, don't install or use it and contact your dealer.
Please read the manual thoroughly before bringing this device into service.
2. Safety Instructions
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Do not touch the device during operation as the housing heats up.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• A qualified technician should install and service this device.
• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
• This device falls under protection class I. It is therefore essential that the device be earthed. Have a qualified
person carry out the electric connection.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
• There may be some smoke or a particular smell when the device is activated for the first time. This is normal and
any smoke or smell will gradually disappear.
• Do not look directly at the light source as sensitive people may go into epileptic seizure if they do.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorised users.
3. General Guidelines
• This device is designed for professional use on stage, in discos, theatres, etc. The VDP575MHS16 should only be
used indoors with an alternating current of max. 230VAC / 50Hz.
• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device is protected against extreme heat (see "Technical Specifications"), dust and
moisture. Respect a minimum distance of 0.5m between the device's light output and any illuminated surface.
• Use an appropriate safety cable to fix the device (e.g. VDLSC8).
VDP575MHS16
1
VELLEMAN

Publicité

loading

Sommaire des Matières pour HQ Power VDP575MHS16

  • Page 1 If in doubt, contact your local waste disposal authorities. Thank you for buying the VDP575MHS16! It should come with an XLR connection cable, a safety cable with a hook and this manual. If the device was damaged in transit, don't install or use it and contact your dealer.
  • Page 2 3. carrying handle 4. base FRONT PANEL 5. power switch 6. DMX output 7. DMX input 8. power cord 9. fuse holder REAR PANEL 10. MODE button 11. ENTER button 12. UP button 13. DOWN button 14. display VDP575MHS16 VELLEMAN...
  • Page 3 CHANNEL 6 : focus CHANNEL 7 : rainbow colour wheel CHANNEL 8 : static colour wheel CHANNEL 9 : prism, auto rotation CHANNEL 10 : static gobo wheel CHANNEL 11 : rotation gobo wheel CHANNEL 12 : gobo rotation VDP575MHS16 VELLEMAN...
  • Page 4 ROTATING GOBO WHEEL Metal gobo 3 Glass gobo 4 Glass gobo 5 Glass gobo 6 Gobo indexing CHANNEL 12 GOBO ROTATION Rotation gobo from slow / fast Rotation gobo reverse from slow / fast CHANNEL 13 IRIS Open / close VDP575MHS16 VELLEMAN...
  • Page 5 Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3- pin XLR input of the VDP575MHS16. Multiple VDP575MHS16s can be linked through serial linking. The linking cable should be two core, screened cable with XLR input and output connectors.
  • Page 6 In the case of the 16-channel VDP575MHS16, you will have to set the start address of the first unit to 1, the second unit to 17 (1 + 16), the third to 33 (17 +16), and so on.
  • Page 7 Heeft u vragen, contacteer dan de plaatselijke autoriteiten inzake verwijdering. Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. De VDP575MHS16 wordt geleverd met een XLR kabel, een veiligheidskabel met haak en deze handleiding. Als het toestel werd beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer.
  • Page 8 Kunt u de straal moeilijk centreren, regel de lamp tot het licht gelijk wordt verdeeld c) Omschrijving (zie fig. op blz. 2) 1. moving head 2. draagjuk 3. handvat 4. voet FRONTPANEEL 5. voedingsschakelaar 6. DMX uitgang 7. DMX ingang 8. voedingskabel 9. zekering VDP575MHS16 VELLEMAN...
  • Page 9 : pan fijnregeling KANAAL 4 : tilt fijnregeling KANAAL 5 : regeling scansnelheid KANAAL 6 : focussering KANAAL 7 : regenboog kleurenwiel KANAAL 8 : vast kleurenwiel KANAAL 9 : prisma, automatische draaibeweging KANAAL 10 : vast gobowiel VDP575MHS16 VELLEMAN...
  • Page 10 Metalen gobo 2 KANAAL 11 DRAAIEND GOBOWIEL Metalen gobo 3 Glazen gobo 4 Glazen gobo 5 Glazen gobo 6 Gobo indexering KANAAL 12 GOBO DRAAIBEWEGING Draaibeweging gobo van traag / snel Omgekeerde draaibeweging gobo van traag / snel VDP575MHS16 VELLEMAN...
  • Page 11 Dimmer van 0 tot 100% c. DMX-512 verbindingen Verbind een XLR kabel met de XLR uitgang van uw controller en de XLR ingang van de VDP575MHS16. U kunt meerdere VDP575MHS16's serieel verbinden. De verbindingskabel moet een beschermde kabel zijn met dubbele kern en met een XLR in- en uitgangsverbinding.
  • Page 12 In het geval van de 16-kanaals VDP575MHS16, zult u het startadres van het eerste toestel op 1 moeten instellen, van het tweede toestel op 17 (1 + 16), van het derde op 33 (17 + 16), enz.
  • Page 13 VDP575MHS16 – PROJECTEUR LYRE PROFESSIONNEL A 16 CANAUX CRUISER 575 1. Introduction Aux résidents de l'Union Européenne Des informations environnementales importantes concernant ce produit Ce symbole sur l'appareil ou l'emballage indique que, si l'appareil est jeté après sa vie, il peut nuire à...
  • Page 14 2. palanche 3. poignée 4. pied PANNEAU FRONTAL 5. interrupteur de puissance 6. sortie DMX 7. entrée DMX 8. cordon d’alimentation 9. fusible PANNEAU ARRIERE 10. bouton MODE 11. bouton ENTER 12. bouton UP 13. bouton DOWN 14. afficheur VDP575MHS16 VELLEMAN...
  • Page 15 • La construction portante de l’appareil doit être capable de supporter 10 x le poids de l’appareil pendant une heure, sans qu’une déformation de la construction en résulte. • Fixez votre VDP575MHS16 à l’aide d’un câble de sécurité. • Evitez de vous positionner en dessous de l’appareil pour l’enlever ou lors du montage ou du nettoyage. Un technicien qualifié...
  • Page 16 Mouvement rotatif de lent / rapide Mouvement gobo rotatif inversé de lent / rapide CANAL 13 IRISATION Ouvert / Fermé CANAL 14 ZOOM Fermé / Ouvert Obturateur CANAL 15 OBTURATEUR, STROBOSCOPE Stroboscope de lent / rapide Effet stroboscope de lent à rapide VDP575MHS16 VELLEMAN...
  • Page 17 "écoutera" un autre canal. Changer les réglages d'un canal n’influencera donc qu'un seul appareil. Dans le cas du VDP575MHS16, un appareil à 16 canaux, vous devez mettre l'adresse de départ du premier appareil sur 1, le second appareil sur 17 (1 + 16), le troisième sur 33 (17 + 16), etc.
  • Page 18 Ampoule 1 x LAMP575MSR/2SYL (incl.) Fusible F6.3A, 230VCA Dimension 379 x 428 x 476mm Poids 36.5kg Température ambiante max. 45°C Température max. du boîtier 80°C Toutes les informations présentées dans cette notice peuvent être modifiées sans notification préalable. VDP575MHS16 VELLEMAN...
  • Page 19 3. Normas generales • Este aparato ha sido diseñado para uso profesional en una discoteca, un teatro, etc. El VDP575MHS16 sólo está permitido para una conexión con una fuente de corriente CA de máx. 230Vca/50Hz y para el uso en interiores.
  • Page 20 • Por razones de seguridad, las modificaciones no autorizadas del aparato están prohibidas. • Utilice sólo el VDP575MHS16 para aplicaciones descritas en este manual a fin de evitar p.ej. cortocircuitos, quemaduras, descargas eléctricas, explosión de la lámpara, etc. Un uso desautorizado puede causar daños y anula la garantía completamente.
  • Page 21 • El soporte donde irá el aparato, debe ser capaz de sostener 10 veces el peso de éste durante una hora, sin que se produzca una deformación de dicho soporte. • Fije el VDP575MHS16 con un cable de seguridad. • Evite ponerse debajo del aparato durante el montaje, la limpieza, etc. Un técnico especializado debe revisar el aparato antes de la puesta en marcha.
  • Page 22 Movimiento giratorio de lento / rápido Movimiento gobo giratorio inverso de lento / rápido CANAL 13 IRIS Abierto / Cerrado CANAL 14 ZOOM Cerrado / Abierto Shutter CANAL 15 SHUTTER, ESTROBOSCOPIO Estroboscopio de lento / rápido Efecto estroboscopio de lento a rápido VDP575MHS16 VELLEMAN...
  • Page 23 En el caso del VDP575MHS16, de 16 canales, la dirección inicial del primer aparato es 1. Introduzca 17 (1 + 16) para el segundo aparato, 33 (17 + 16) para el tercer aparato, etc.
  • Page 24 1 x LAMP575MSR/2SYL (incl.) Fusible F6.3A, 230VCA Dimensiones 379 x 428 x 476mm Peso 36.5kg Temperatura ambiente máx. 45°C Temperatura máx. de la caja 80°C Se pueden modificar las especificaciones y el contenido de este manual sin previo aviso. VDP575MHS16 VELLEMAN...
  • Page 25 Danke für Ihren Ankauf! Bitte lesen Sie die Bedienungsanleitung vor Inbetriebnahme sorgfältig durch ! Der VDP575MHS16 wird mit einem XLR-Kabel, einem Sicherheitskabel mit Haken und dieser Bedienungsanleitung geliefert. Überprüfen Sie, ob Transportschäden vorliegen. Sollte dies der Fall sein, verwenden Sie das Gerät nicht und wenden Sie sich an Ihren Händler.
  • Page 26 3. Allgemeine Richtlinien • Dieses Gerät ist eine Lichtsteuerung für den professionellen Einsatz auf Bühnen, in Discotheken, Theatern, usw. Das VDP575MHS16 ist nur zur Verwendung in Innenräumen und mit einer Wechselspannung von 230Vac/50Hz konzipiert worden. • Lichteffekte sind nicht für permanenten Betrieb entworfen worden. Regelmäßiges Ausschalten wird die Lebensdauer verlängern.
  • Page 27 5. Anwendung a. Der 'Moving Head'-Scheinwerfer wird durch 16 DMX-Kanäle gesteuert: KANAL 1 : Schwenkbewegung (max. 530°) KANAL 2 : Neigung (max. 280°) KANAL 3 : Feinabstimmung Schwenkbewegung KANAL 4 : Feinabstimmung Neigung KANAL 5 : Regelung Scangeschwindigkeit VDP575MHS16 VELLEMAN...
  • Page 28 STOP Drehbewegung 3-seitiges Prisma von langsam auf schnell weiß Goborad 1 Goborad 2 Goborad 3 Goborad 4 KANAL 10 FESTES GOBORAD Goborad 5 Goborad 6 Goborad 7 Goborad 8 Goborad 9 Gobo "Flow Effekt"” von langsam auf schnell VDP575MHS16 VELLEMAN...
  • Page 29 Kabel lang ist oder in einer Umgebung mit vielem elektrischem Rauschen (z.B. Discos). Der Abschlusswiderstand verhindert Störung des digitalen Steuersignals durch elektrisches Rauschen. Der DMX-Abschlusswiderstand ist nur eine XLR-Buchse mit einem 120 Widerstand zwischen 2 und 3, die den XLR-Ausgang des letzten Gerätes in der Kette angeschlossen wird. Siehe Abbildung. VDP575MHS16 VELLEMAN...
  • Page 30 Gerät auf einem anderen Kanal Signale empfangen. Wenn Sie die Einstellungen ändern, wird nur das besagte Gerät beeinflusst. In dem Fall des 16-Kanal VDP575MHS16, werden Sie die Startadresse des ersten Gerätes auf 1 einstellen müssen, des zweiten Gerätes auf 17 (1 + 16), des dritten Gerätes 33 (17 + 16), usw.
  • Page 31 8. Technische Daten Stromversorgung max. 230VAC / 50Hz max. 850W Lampe 1 x LAMP575MSR/2SYL (incl.) Sicherung F6.3A, 230VAC Abmessungen 379 x 428 x 476mm Gewicht 36.5kg Max. Umgebungstemperatur 45°C Max. Temperatur Gehäuse 80°C Alle Änderungen vorbehalten. VDP575MHS16 VELLEMAN...