Remote Control - REICH MoveControl Economy Twin 4WD Instructions D'assemblage Et Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7. Remote control

Activate the MoveControl by double-
clicking the I/O button on the remote con-
trol - the LED is ON.
Now you can execute the movements
according to the symbols shown on the
remote control. The vehicle only moves
as long as you keep the buttons pushed
down.
The integrated "Soft-Start" gives an acoustic sig-
nal when starting to move which is meant as a
warning signal of a caravan or trailer starting to
move.
The movement buttons have to be pressed re-
spectively one by one. The arrows by the buttons
show the respective direction of motion.
Always all 4 wheels are driven (real all-wheel
drive = 4WD).
Forward
Curve drive:
The patented control turns the
caravan to the desired direction
with automatic control of all 4
wheels.
Rotation
(pushing 2 buttons simultaneously) :
+
+
Turn off the MoveControl by pushing the
I/O button once at the remote control. The
red LED will turn OFF.
GB8
Backward
Clockwise rotation
(forward-backward)
Anti clockwise rotation
(forward-backward)
If the movements do not correspond to the sym-
bols on the remote control, the cable connections
of the right and the left drive units need to be
checked and - if necessary - exchanged (see
wiring diagram
).
It is important that in such a case you turn the
isolating switch off and disconnect the basic sta-
tions from the electricity supply.
Make sure that you never exchange
the Positive (+) and Negative (-) of
the electricity supply.
If you experience radio interference you can con-
nect the cable the cable between handset and the
master basic station.
Master Basic Station
The cable also can be used if the batteries of the
remote control are used up.
Security advice:
Be careful that no one is in the mov-
ing area while manoeuvring the
caravan!
Also check on the side of the cara-
van which turned away from you.
Keep a safe distance during moving.
Always keep sufficient distance of
the friction rollers after maintenance
or cleaning.
Switching plant absolutely current-
freely
and
against roll away at works in the
area of the friction rollers.
safeguarding
vehicle

Publicité

Table des Matières
loading

Table des Matières