Safety Instructions - erba 03056 Mode D'emploi

GB - INSTRUCTION MANUAL

1. SAFETY INSTRUCTIONS

Read this material before using this product. Failure to do so can result in serious injury. KEEP THIS
MANUAL. When giving this machine to third parties, always include this manual. We do not accept
any liabilities for accidents or damages that result from misuse. Removal/Alteration of any
safety devices or of the machine in general will result in the loss of warranty. The
buyer assumes all risk and liability arising out of his or her repairs/alterations to the
original product or replacement parts thereto, or arising out of his or her installation
of replacement parts thereto.
Never overload the hydraulic body repair kit.
Always keep your work area well lit, clean and free of obstacles.
When using the elbowed end pieces the capacity of the hydraulic body repair kit is reduced by 50%.
With each extension bar the capacity of the hydraulic body repair kit is reduced by 50%.
Always make sure that all extension bars and end pieces are installed correctly and securely
before operating the product.
Always make sure to carefully position the end pieces so that the load is distributed normally (not
at an angle) and centered across the length of the extension bars.
Keep children away from this product.
Always use personal protective equipment when operating hydraulic products.
Never use the hydraulic body repair kit when it is damaged.
Do not modify the hydraulic body repair kit.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 10
Changes, print, punctuation and other errors reserved!
Instruction manual
03056, 03058
Issue: 06/2018