Roland Edirol UR-80 Mode D'emploi page 32

Controlling your software
You can assign the desired MIDI messages to the UR-80's knobs, faders, and buttons. A set of such
MIDI message assignments is called a "memory set".
The UR-80 contains eight different memory sets in its internal memory. When shipped from the
factory, the assignments of the PRESET memory set are selected.
Switching memory sets
Hold down the MEMORY button and press a TRACK STATUS button to select a memory set.
fig.memory-set_120
Memory sets
Memory
PRESET
USR 1
USR 2
USR 3
USR 4
USR 5
USR 6
USR 7
32
Contents
This is the UR-80's basic memory set. It cannot be rewritten. Use this memory set if you will leave
the messages of the UR-80 fixed and make assignments on your software. You will also use this
memory set for SONAR.
Rewritable. With the factory settings, this is set for Cubase SX.
Rewritable. With the factory settings, this is set for Cubase VST.
Rewritable. With the factory settings, this is set to Logic.
Rewritable. With the factory settings, this is set for Pro Tools LE and Digital Performer 3.
Rewritable. With the factory settings, this is set for Reason.
Rewritable. With the factory settings, this is set for compatibility with MCR-8 Mode4 A/1-8.
Rewritable. With the factory settings, this is set for compatibility with MCR-8 Mode4 B/9-16.