Care Guidelines; Caring For The Glass Panes And Profi Les; Caring For The Fi Ttings; Do Not Use - HOESCH ERGO+ 6436 Instructions De Montage Et D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11

Care guidelines

Never use abrasive cleaners to clean the tub! After every bath, rinse out the tub with clear water and wipe with a damp
cloth. To clean the tub more thouroughly on occasion, use a small amount of cleaning liquid (such as Hoesch Cleaner
Article No. 699900). Afterwards, polish with a soft dry cloth. Stubborn dirt can be removed with warm water and liquid
cleaner or with a damp cloth and soap powder. To remove hard water deposits, use a damp cloth and a 10% vinegar
solution. When using chemical drain cleaners, follow the manufacturer's instructions carefully! Rinse thoroughly with
plenty of water. Superfi cial scratches or rough spots on shiny tub fi nishes can be removexd with the Hoesch Care Set
(Article No. 699100, please follow the instructions on the package). To remove deep scratches or burnt spots on shiny
or matt tub fi nishes, smooth over the affected areas cautiously with fi ne sandpaper (no. 500) or a metal polisher made
of very fi ne steel wool. Be careful to work only in a back-andforth direction; avoid circular motions. On tubs with shiny
fi nishes (and on these tubs only!), apply the special polishing cream included in the Hoesch Care Set to the matt areas
resulting from this corrective work.
Caring for the glass panes and profi les
Glass should be wiped only with damp cloth (never dry). You can also use a squeegee to dry the panels.
Only use gentle cleaners such as a weak vinegar and water solution. Never use cleansing powder or cleaners
containing chlorine.
Do not use microfi ber cloths. They destroy any coatings and may cause the glass to become scratched.
Caring for the fi ttings
For day-to-day cleaning, use neutral or citrus-based cleaning agents only. Use cleaning agents intended for cleaning
fi ttings only. Follow the instructions for the cleaning agent!
Spray cleaning agent onto a cloth and use it to clean the fi ttings.
Rinse the fi tting with plenty of water and polish with a soft cloth.

Do not use ...

Scouring or scraping cleaning textiles or sponges.
Cleaning agents with fl uid acids such as hydrochloric or citric acid.
Scouring agents.
Cleaning agents containing chlorine bleach lye.
GB
9

Publicité

Table des Matières
loading

Table des Matières