What To Do If - Electrolux EHC 650 X Instructions De Montage Et Mode D'emploi

Removing deposits
1. Place a scraper on the glass ceramic surface at an
angle.
2. Remove residues by sliding the blade over the sur-
face.
3. Wipe the appliance with a damp cloth and a little
washing up liquid.
4. Rub the appliance dry using a clean cloth.
Type of dirt
sugar, food containing sugar
plastics, tin foil
limescale and water rings
fat splashes
shiny metallic discolorations
*Scrapers and cleaners for glass ceramic and stainless steel
can be purchased in specialist shops
3
Remove stubborn residues with a cleaner for
glass ceramic or stainless steel.
3
Scratches or dark stains on the glass ceramic
that cannot be removed do not however affect
the functioning of the appliance.

What to do if ...

Problem
The cooking zones are not func-
tioning.
The residual heat indicator is not
displaying anything
If you are unable to remedy the problem by fol-
lowing the above suggestions, please contact
your dealer or the Customer Care Department.
1
Warning! Repairs to the appliance are only to
be carried out by qualified service engineers.
Considerable danger to the user may result
from improper repairs.
3
If the appliance has been wrongly operated,
the visit from the customer service technician
or dealer may not take place free of charge,
even during the warranty period.
immedi- when the appliance has
ately
yes
yes
---
---
---
Possible cause
The desired heat setting is not set.
The fuse in the house's electrical
wiring (fuse box) has been tripped.
The cooking zone was only on for a
short time and is therefore not hot
Remove
cooled down
---
---
yes
yes
yes
Set the heat setting.
Check the fuse.
If the fuses trip a number of times,
please call an authorised electri-
cian.
If the cooking zone is supposed to
be hot, call the Customer Service
Department.
using
a scraper*
cleaner for glass ceramic
or stainless steel*
Remedy
7